Medi Rental

Medi Rental

Buy or rent is a tough question to answer. Our experts are on call to support you in making the right decision understanding the patient needs and equipment features

We advice you the best solution to your changing needs as per patient condition

We provide  short-term need for some mobility equipment or ICU Setup at your home

We offer weekly , fortnightly and monthly rentals of Standard Wheelchairs, Walkers,  Hospital Beds, Air Beds, Oxygen Concentrators, Suction Machine, Pulse Oximeter, Bipap Machine, Cpap machines.

Our rates are some of the best in the area and we do offer delivery and pick up of the equipment at a location of your choosing (an additional fee may apply)

Rental could be best solution to your hospitals or home care needs

Call our expert right away to advice you on what suits you the best


FILTERS

By Expert Care

  • Elderly Care
  • Critical Care
  • Accident Recovery
  • Post Operative Care

By Product Category

  • Mobility Aids
  • Patient Care
  • Respiratory
  • Wheelchair

By Product Sub-Category

  • Toilet and Bath safety
  • Walker and stick
  • Air Bed
  • BIPAP
  • CPAP
  • Oxygen Concentrator
  • Manual

By Product Brand

  • Vissco
  • Karma
  • Resmed
  • Drive Devilbiss
  • Philips

Vissco Commode raiser

Vissco Commode raiser

Karma Walker Ryder 50 MS

Karma Walker Ryder 50 MS

Karma Aluminum Walker WK 50

Karma Aluminum Walker WK 50

Karma Aluminum Walker WK 51

Karma Aluminum Walker WK 51

Karma Air Bed Airwave 3

Karma Air Bed Airwave 3

Resmed AirCurve™ 10 V Auto

Resmed AirCurve™ 10 V Auto

Specifications

  • Height    116 mm
  • Weight    1248 gm
  • Breadth    150 mm
  • Length    255 mm
  • Sound pressure level    
  • Supplemental oxygen Maximum flow    15 L/min (CPAP, S); 4 L/min (VAuto)
  • Storage and transport humidity    5 to 95%relative humidity, non-condensing
  • Ramp Time    You can set your Ramp Time to Off or between 5 to 45 minutes.
  • Water capacity:    To maximum fill line 380 mL
  • Air outlet    22 mm
  • Typical power consumption    53W (57VA)
  • Sensors    Pressure sensor: Internally located at device outlet, analoguegauge pressure type, -5 to +45cmH2O (-5 to +45 hPa); Flow sensor:Internally located at device inlet, digital mass flow type, -70 to +180 L/min
  • Operating altitude    Sea level to 2,591m; air pressure range 1013hPa to 738 hPa
  • Maximum single fault steady state pressure    Device will shut down in the presence of a single fault if the steady state pressure exceeds:30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
  • Modes    S, VAuto, CPAP
  • Sound power level    Pressure level measured according to EN ISO 17510-1:2009 (CPAP mode):SlimLine:26.6 dBA with uncertainty of 2 dBAStandard:26.6 dBA with uncertainty of 2 dBAPower level measured according to EN ISO 17510-1:2009 (CPAP mode):SlimLine:34.6 dBA with uncertainty of 2 dBAStandard:34.6 dBA with uncertainty of 2 dBADeclared dual-number noise emission values in accordance with ISO4871:1996.
  • Peak power consumption    104W (108VA)
  • Operating pressure range    S, VAuto: 2 to 25cm H2O (2 to 25 hPa); CPAP: 4 to 20cmH2O (4 to 20 hPa)
  • Power supply unit    90W power supply unit; AC input range:100–240V, 50–60Hz 1.0–1.5A, Class II115V, 400Hz 1.5A, Class II (nominal for aircraft use); DC output:24V 3.75A
  • Storage and transport temperature    -20°C to +60°C
  • Operating humidity    10 to 95% relative humidity, non-condensin
  • Housing construction    Flame retardant engineering thermoplastic
  • Operating temperature    +5°C to +35°C Note: The air flow for breathing produced by this therapy device can be higher than the temperature of the room. Under extreme ambient temperature conditions (40°C) the device remains safe.
  • Wireless Module    Technology used:4G, 2G. It is recommended that the device is a minimum distance of 2 cm from the body during operation. Not applicable to masks, tubes or accessories. Technology may not be available in all regions
  •  

Resmed AirSense 10 Autoset Tripack 3G CPAP Device

Resmed AirSense 10 Autoset Tripack 3G CPAP Device

Specifications

  • Height    116 mm
  • Weight    1248 gm
  • Breadth    255 mm
  • Length    150 mm
  • Pressure measurement tolerance    ±[0.5 cm H20 (0.5 hPa) + 4% of measured value]
  • Flow measurement tolerance    ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
  • Peak power consumption    104W (108VA)
  • Operating pressure range    4 to 20 cm H2O
  • Supplemental oxygen Maximum flow    4 L/min
  • Power supply unit    90W power supply unit
  • Storage and transport humidity    5 to 95% relative humidity, non-condensing
  • Storage and transport temperature    -4°F to +140°F (-20°C to +60°C)
  • Operating humidity    10 to 95% relative humidity, non-condensing
  • Housing construction    Flame retardant engineering thermoplastic
  • Water capacity:    To maximum fill line 380 mL
  • Air outlet    22 mm (complies with ISO 5356-1:2004)
  • Typical power consumption    53W (57VA)
  • Sensors    Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
  • Operating altitude    Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
  • Operating temperature    +41°F to +95°F (+5°C to +35°C)
  • Maximum single fault steady state pressure    Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
  • Modes    CPAP

Resmed AirMini portable CPAP Device

Resmed AirMini portable CPAP Device

Specifications

  • Height    52 mm
  • Weight    300 gm
  • Breadth    84 mm
  • Length    136 mm
  • Housing construction    Flame retardant engineering thermoplastic
  • Air outlet    Proprietary connector, 16mm inner diameter. Not compatible with EN ISO 5356-1 connectors
  • Standby power consumption    1 W
  • Power supply unit    AC input range: 100–240V, 50–60Hz, 0.5-0.3A 115V, 400Hz for aircraft use, 0.4A
  • Typical power consumption    6.3W
  • Peak power consumption    27W
  • Operating temperature    +41°F to +95°F (+5°C to +35°C)
  • Operating humidity    10 to 95% relative humidity, noncondensing
  • Storage and transport temperature    -13°F to +158°F (-25°C to +70°C)
  • Storage and transport humidity    5 to 95% relative humidity, noncondensing
  • Operating altitude    Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
  • Modes    CPAP, APAP, For Her

Resmed Floton Auto CPAP

Resmed Floton Auto CPAP

Specifications

  • Height    93 mm
  • Weight    1.2 kg
  • Breadth    117 mm
  • Length    170 mm
  • Sound power level    <29 dB (A)
  • Operating pressure range    4–20 cm H2O
  • Power supply unit    100-240 VAC, 50-60 Hz, 24V, 2.5A Max
  • Operating humidity    10 to 93% relative humidity, non-condensing
  • Operating temperature    +5°C to +35°C
  • Ramp Time    0-60 Min adjustable 1Min /Step
     

Drive Devilbiss Oxygen Concentrator

Drive Devilbiss Oxygen Concentrator

Philips Ever Flo OC

Philips Ever Flo OC

Karma Fighter C

Karma Fighter C

Resmed AirSense 10 Elite Tripack - 3G

Resmed AirSense 10 Elite Tripack - 3G

 

Specifications

  • Height    116 mm
  • Weight    1248 gm
  • Breadth    255 mm
  • Length    150 mm
  • Pressure measurement tolerance    ±[0.5 cm H20 (0.5 hPa) + 4% of measured value]
  • Flow measurement tolerance    ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
  • Peak power consumption    104W (108VA)
  • Operating pressure range    4 to 20 cm H2O
  • Supplemental oxygen Maximum flow    4 L/min
  • Power supply unit    90W power supply unit
  • Storage and transport humidity    5 to 95% relative humidity, non-condensing
  • Storage and transport temperature    -4°F to +140°F (-20°C to +60°C)
  • Operating humidity    10 to 95% relative humidity, non-condensing
  • Housing construction    Flame retardant engineering thermoplastic
  • Water capacity:    To maximum fill line 380 mL
  • Air outlet    22 mm (complies with ISO 5356-1:2004)
  • Typical power consumption    53W (57VA)
  • Sensors    Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
  • Operating altitude    Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
  • Operating temperature    +41°F to +95°F (+5°C to +35°C)
  • Maximum single fault steady state pressure    Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
  • Modes    CPAP
aaa