FILTERS


By Product Category

  • Respiratory

By Product Sub-Category

  • APAP

By Product Brand

  • Resmed

Resmed Airstart 10 APAP

Specifications

  • Height:    116 mm
  • Weight:     1106 gm
  • Breadth:     205 mm
  • Length:     150 mm
  • Sound pressure level:     26.6 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2009 (CPAP mode)
  • Modes:     CPAP, APAP, Ramp
  • Sound power level:     26.6 dBA with uncertainty of 2 dBA
  • Peak power consumption:     104W (108VA)
  • Operating pressure range:     4–20 cm H2O
  • Supplemental oxygen Maximum flow    Recommended maximum flow: 4 L/min
  • Power supply unit:     90W power supply unit
  • Storage and transport humidity:     5 to 95% relative humidity, non-condensing
  • Storage and transport temperature:     -20°C to +60°C
  • Operating humidity:     10 to 95% relative humidity, non-condensing
  • Housing construction:     Flame retardant engineering thermoplastic
  • Air outlet:     22 mm air outlet complies with ISO 5356-1:2004
  • Typical power consumption:     53W (57VA)

 

Sensors    

  • Pressure sensor: Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
  • Operating altitude    Sea level to 2,591 m; air pressure range 1013 hPa to 738 hPa
  • Operating temperature    +5°C to +35°C
  • Maximum single fault steady-state pressure  
  • The Device will shut down in the presence of a single fault if the steady-state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec.

Resmed Airstart 10 APAP

Specifications

  • Height:    116 mm
  • Weight:     1106 gm
  • Breadth:     205 mm
  • Length:     150 mm
  • Sound pressure level:     26.6 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2009 (CPAP mode)
  • Modes:     CPAP, APAP, Ramp
  • Sound power level:     26.6 dBA with uncertainty of 2 dBA
  • Peak power consumption:     104W (108VA)
  • Operating pressure range:     4–20 cm H2O
  • Supplemental oxygen Maximum flow    Recommended maximum flow: 4 L/min
  • Power supply unit:     90W power supply unit
  • Storage and transport humidity:     5 to 95% relative humidity, non-condensing
  • Storage and transport temperature:     -20°C to +60°C
  • Operating humidity:     10 to 95% relative humidity, non-condensing
  • Housing construction:     Flame retardant engineering thermoplastic
  • Air outlet:     22 mm air outlet complies with ISO 5356-1:2004
  • Typical power consumption:     53W (57VA)

 

Sensors    

  • Pressure sensor: Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
  • Operating altitude    Sea level to 2,591 m; air pressure range 1013 hPa to 738 hPa
  • Operating temperature    +5°C to +35°C
  • Maximum single fault steady-state pressure  
  • The Device will shut down in the presence of a single fault if the steady-state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec.

aaa