Airfit N20 Cushion

Specifications

• Height:   10 cm
• Weight:    50 gm
• Breadth:    10 cm
• Length:    10 cm

Airfit F20 Cushion

Specifications

• Height:    20 cm
• Weight:   150 gm
• Breadth:    20 cm
• Length:    20 cm

Airfit N20 Frame SYS

Specifications

• Height:   20 cm
• Weight:    200 gm
• Breadth:    20 cm
• Length:    20 cm

Airfit F20 Frame SYS

Specifications

• Height:    20 cm
• Weight:    200 gm
• Breadth:    20 cm
• Length:    20 cm

Airfit F20 Headgear

Specifications

• Height:    10 cm
• Weight:    50 gm
• Breadth:    10 cm
• Length:    10 cm

Airfit N20 Headgear

Specifications

• Height:    20 cm
• Weight:    50 gm
• Breadth:    20 cm
• Length:    20 cm

Filter for S9 AirSense (pack of 3)

Specifications

• Height:    2 cm
• Weight:    5 gm
• Breadth:    5 cm
• Length:    10 cm

AirMini Filter (Pack of 3)

Specifications

• Height:    2 cm
• Weight:    5 gm
• Breadth:    2 cm
• Length:    5 cm

SlimLine Tube

Specifications

• Height:    150 mm
• Weight:    100 gm
• Breadth:    150 mm
• Length:    200 mm

ClimateLine Tube

Specifications

• Height:   20 cm
• Weight:    200 gm
• Breadth:    20 cm
• Length:    20 cm
• Inner diameter:    0.6” (15 mm)
• Length of Tube:    6’6” (2.0 m)
• Material:    Flexible plastic and electrical components.

Humid X Plus - Pack of 6

Specifications

• Height:   5 cm
• Weight:    50 gm
• Breadth:    10 cm
• Length:    10 cm

HumidAir Standard Tub

Specifications

• Height:    5 cm
• Weight:    100 gm
• Breadth:    10 cm
• Length:    10 cm

Humid X Plus - Pack of 3

Specifications

• Height:   5 cm
• Weight:    100 gm
• Breadth:    10 cm
• Length: 10 cm

Resmed Airstart 10 APAP

Specifications

• Height:    116 mm
• Weight:     1106 gm
• Breadth:     205 mm
• Length:     150 mm
• Sound pressure level:     26.6 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2009 (CPAP mode)
• Modes:     CPAP, APAP, Ramp
• Sound power level:     26.6 dBA with uncertainty of 2 dBA
• Peak power consumption:     104W (108VA)
• Operating pressure range:     4–20 cm H2O
• Supplemental oxygen Maximum flow    Recommended maximum flow: 4 L/min
• Power supply unit:     90W power supply unit
• Storage and transport humidity:     5 to 95% relative humidity, non-condensing
• Storage and transport temperature:     -20°C to +60°C
• Operating humidity:     10 to 95% relative humidity, non-condensing
• Housing construction:     Flame retardant engineering thermoplastic
• Air outlet:     22 mm air outlet complies with ISO 5356-1:2004
• Typical power consumption:     53W (57VA)

Sensors    

• Pressure sensor: Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
• Operating altitude    Sea level to 2,591 m; air pressure range 1013 hPa to 738 hPa
• Operating temperature    +5°C to +35°C
• Maximum single fault steady-state pressure  
• The Device will shut down in the presence of a single fault if the steady-state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec.

Resmed AirCurve™ 10 V Auto

Specifications

• Height    116 mm
• Weight    1248 gm
• Breadth    150 mm
• Length    255 mm
• Sound pressure level    
• Supplemental oxygen Maximum flow    15 L/min (CPAP, S); 4 L/min (VAuto)
• Storage and transport humidity    5 to 95%relative humidity, non-condensing
• Ramp Time    You can set your Ramp Time to Off or between 5 to 45 minutes.
• Water capacity:    To maximum fill line 380 mL
• Air outlet    22 mm
• Typical power consumption    53W (57VA)
• Sensors    Pressure sensor: Internally located at device outlet, analoguegauge pressure type, -5 to +45cmH2O (-5 to +45 hPa); Flow sensor:Internally located at device inlet, digital mass flow type, -70 to +180 L/min
• Operating altitude    Sea level to 2,591m; air pressure range 1013hPa to 738 hPa
• Maximum single fault steady state pressure    Device will shut down in the presence of a single fault if the steady state pressure exceeds:30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
• Modes    S, VAuto, CPAP
• Sound power level    Pressure level measured according to EN ISO 17510-1:2009 (CPAP mode):SlimLine:26.6 dBA with uncertainty of 2 dBAStandard:26.6 dBA with uncertainty of 2 dBAPower level measured according to EN ISO 17510-1:2009 (CPAP mode):SlimLine:34.6 dBA with uncertainty of 2 dBAStandard:34.6 dBA with uncertainty of 2 dBADeclared dual-number noise emission values in accordance with ISO4871:1996.
• Peak power consumption    104W (108VA)
• Operating pressure range    S, VAuto: 2 to 25cm H2O (2 to 25 hPa); CPAP: 4 to 20cmH2O (4 to 20 hPa)
• Power supply unit    90W power supply unit; AC input range:100–240V, 50–60Hz 1.0–1.5A, Class II115V, 400Hz 1.5A, Class II (nominal for aircraft use); DC output:24V 3.75A
• Storage and transport temperature    -20°C to +60°C
• Operating humidity    10 to 95% relative humidity, non-condensin
• Housing construction    Flame retardant engineering thermoplastic
• Operating temperature    +5°C to +35°C Note: The air flow for breathing produced by this therapy device can be higher than the temperature of the room. Under extreme ambient temperature conditions (40°C) the device remains safe.
• Wireless Module    Technology used:4G, 2G. It is recommended that the device is a minimum distance of 2 cm from the body during operation. Not applicable to masks, tubes or accessories. Technology may not be available in all regions
•  

Resmed AirSense 10 Autoset Tripack 3G CPAP Device

Specifications

• Height    116 mm
• Weight    1248 gm
• Breadth    255 mm
• Length    150 mm
• Pressure measurement tolerance    ±[0.5 cm H20 (0.5 hPa) + 4% of measured value]
• Flow measurement tolerance    ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
• Peak power consumption    104W (108VA)
• Operating pressure range    4 to 20 cm H2O
• Supplemental oxygen Maximum flow    4 L/min
• Power supply unit    90W power supply unit
• Storage and transport humidity    5 to 95% relative humidity, non-condensing
• Storage and transport temperature    -4°F to +140°F (-20°C to +60°C)
• Operating humidity    10 to 95% relative humidity, non-condensing
• Housing construction    Flame retardant engineering thermoplastic
• Water capacity:    To maximum fill line 380 mL
• Air outlet    22 mm (complies with ISO 5356-1:2004)
• Typical power consumption    53W (57VA)
• Sensors    Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
• Operating altitude    Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
• Operating temperature    +41°F to +95°F (+5°C to +35°C)
• Maximum single fault steady state pressure    Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
• Modes    CPAP

Resmed AirMini portable CPAP Device

Specifications

• Height    52 mm
• Weight    300 gm
• Breadth    84 mm
• Length    136 mm
• Housing construction    Flame retardant engineering thermoplastic
• Air outlet    Proprietary connector, 16mm inner diameter. Not compatible with EN ISO 5356-1 connectors
• Standby power consumption    1 W
• Power supply unit    AC input range: 100–240V, 50–60Hz, 0.5-0.3A 115V, 400Hz for aircraft use, 0.4A
• Typical power consumption    6.3W
• Peak power consumption    27W
• Operating temperature    +41°F to +95°F (+5°C to +35°C)
• Operating humidity    10 to 95% relative humidity, noncondensing
• Storage and transport temperature    -13°F to +158°F (-25°C to +70°C)
• Storage and transport humidity    5 to 95% relative humidity, noncondensing
• Operating altitude    Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
• Modes    CPAP, APAP, For Her

Resmed Floton Auto CPAP

Specifications

• Height    93 mm
• Weight    1.2 kg
• Breadth    117 mm
• Length    170 mm
• Sound power level    <29 dB (A)
• Operating pressure range    4–20 cm H2O
• Power supply unit    100-240 VAC, 50-60 Hz, 24V, 2.5A Max
• Operating humidity    10 to 93% relative humidity, non-condensing
• Operating temperature    +5°C to +35°C
• Ramp Time    0-60 Min adjustable 1Min /Step
   

Resmed AirFit F30 Full Face Mask

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

Resmed Mirage Quattro Full Face Mask

Specifications

• Height    186 mm
• Weight    200 gm
• Breadth    109 mm
• Length    108 mm

Resmed Full face mask AirFit F20

Specifications

• Height    154 mm
• Weight    200 gm
• Breadth    159 mm
• Length    147 mm

Resmed Full Face mask AcuCare F1 - 4

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

Resmed Full Face mask AcuCare F1 - 0

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

Resmed Full Face mask AcuCare F1 - 1

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

Resmed AirFit P10 Nasal Pillow Mask

Specifications

• Height    590 mm
• Weight    200 gm
• Breadth    149 mm
• Length    30 mm

Resmed P10 AirMini Mask Pack

Specifications

• Height    37 mm
• Weight    50 gm
• Breadth    149 mm
• Length    175 mm
   

Resmed AirFit P30i Nasal Pillow Mask (S)

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

Resmed Nasal mask AirFit N20

Specifications

• Height    339 mm
• Weight    200 gm
• Breadth    291 mm
• Length    162 mm

Resmed AirFit N30i Nasal Cradle Mask (STD)

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

ResMed Mirage Micro Nasal Mask (M)

Specifications

• Height    155 mm
• Weight    200 gm
• Breadth    91 mm
• Length    98 mm

Resmed Nasal mask AirFit N20 (L)

Specifications

• Height    339 mm
• Weight    200 gm
• Breadth    291 mm
• Length    162 mm

N20 AirMini Set Up pack

Specifications

• Height    6 cm
• Weight    250 gm
• Breadth    15 cm
• Length    25 cm

Handyneb Nebuliser

Handyneb Vaporiser

Drive Portable OC iGO2

Philips Simply Go Portable OC

SimplyGo Mini Portable OC

Drive Devilbiss Oxygen Concentrator

Philips Ever Flo OC

BPL Oxy 5 Neo Dual

BPL Oxy 5 Neo

Yuwell Double Bottle Suction Machine

Yuwell Suction Machine

Resmed AirSense 10 Elite Tripack - 3G

Specifications

• Height    116 mm
• Weight    1248 gm
• Breadth    255 mm
• Length    150 mm
• Pressure measurement tolerance    ±[0.5 cm H20 (0.5 hPa) + 4% of measured value]
• Flow measurement tolerance    ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
• Peak power consumption    104W (108VA)
• Operating pressure range    4 to 20 cm H2O
• Supplemental oxygen Maximum flow    4 L/min
• Power supply unit    90W power supply unit
• Storage and transport humidity    5 to 95% relative humidity, non-condensing
• Storage and transport temperature    -4°F to +140°F (-20°C to +60°C)
• Operating humidity    10 to 95% relative humidity, non-condensing
• Housing construction    Flame retardant engineering thermoplastic
• Water capacity:    To maximum fill line 380 mL
• Air outlet    22 mm (complies with ISO 5356-1:2004)
• Typical power consumption    53W (57VA)
• Sensors    Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
• Operating altitude    Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
• Operating temperature    +41°F to +95°F (+5°C to +35°C)
• Maximum single fault steady state pressure    Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
• Modes    CPAP