BPL BP Monitor B3

BPL BP Monitor B3

BPL BP Monitor B1

Features High-tech measurement technology to monitor blood pressure from the arm – all with the push of a button Extra large LCD display of 84.1 X 55.1 mm provides excellent display clarity and enables easy reading Automatically alerts the user when heart rhythm is either 25% faster or slower than the average rhythm Automatically indicates WHO blood pressure classification after the completion of each measurement Automatic memory function records the last 120 measurements in 4 groups for efficient and simplified tracking Visually indicates when the battery has been discharged below a specific level Automatically calculates the average of last three readings stored in memory"

Diamond BP monitor

Omron BP monitor

BPL Infrared Thermometer accudgit F2

Features Non-contact Forehead Mode Clinical Accuracy Selectable °F and °C Safe and Hygienic Quick and Easy Fever Alarm Auto Shut Off Low battery Indicationthe user when there is a problem with digital error messages Shuts down the device when idle for 3 mins, thereby extending the battery life 45 X 30mm LCD display provides excellent display clarity Visually indicates when the battery has been discharged below a specific level

BPL Infrared Thermometer accudgit E1

Features Enables the quick detection of body temperature from eardrum Capable of storing up to 20 sets of measurement data Equipped with a bi-colour backlit LCD screen Shuts down the device within 10 seconds when not in use Has fever alarm function for temperature test Acquires temperature readings within 0.5 second

BPL Infrared Thermometer accudgit F1

Features Allows for temperature measurements from forehead or ear Comes with two temperature modes - °F and °C Has fever alarm function for temperature test Capable of storing up to 20 sets of measurement data Shuts down the device within 10 seconds when not in use

BPL Pulse Oimeter Smart Oxy Lite

Features Dual color OLED display for high resolution Comes with large fonts and 6 display modes that align as per viewer's comfort Low battery indication Auto switch off Alarm for low perfusion Hihgly accurate even in low perfusion conditions ~ 0.2%"

BPL Pulse Oimeter IOXY

Features User-friendly with big font display and brightness control Connects to smartphone through bluetooth and connects to Android 4.3 or higher Perfusion Index Display Monitored data displayed in four directions and six display modes"

BPL Pulse Oimeter SmartOxy

Features Has a Color OLED screen Comes with big font display and brightness control Monitored data displayed in four directions and six display modes PI graph represents continuous peripheral perfusion Comes with a compact and easy to carry pouch"

Hicks Digital Thermometer

Plain Bed 2

? Bed Size : L : 2100 mm x W : 1080 mm x H : 510mm ? Material: Genuine CRC Heavy Duty Rectangular Pipes ? Side Railings: On Request ? Head & Foot : SS / MS ? Coatings: Epoxy Powder Coating.

Plain Bed

Bed Size : L : 2100 mm x W : 1080 mm x H : 510mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: On Request Head & Foot : Polymer ABS / SS Coatings: Epoxy Powder Coating.

One Function (Head Up) Manual Crank Bed

Bed Size : L : 2100 mm x W : 1080 mm x H : 510mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: On Request Head & Foot : Polymer ABS / SS Coatings: Epoxy Powder Coating.

2 Functions (Head & Foot) Manual Crank Bed

Bed Size: L: 2100 mm x W: 1080 mm x H: 510mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: Aluminium / SS Head & Foot : Polymer ABS / PP. Coatings: Epoxy Powder Coating.

3 Functions Manual Crank Bed

Bed Size: L: 2100 mm x W: 1080 mm x H: 450 to 750 mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: Aluminium / SS Head & Foot : Polymer ABS / PP. Coatings: Epoxy Powder Coating.

5 Functions Manual Crank Bed 3

Bed Size: L: 2100 mm x W: 1080 mm x H: 450 to 750 mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: Aluminium / SS. Head & Foot : Polymer ABS / PP. Coatings: Epoxy Powder Coating.

5 Functions Manual Crank Bed 2

Bed Size: L: 2100 mm x W: 1080 mm x H: 450 to 750 mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: Polymer ABS / PP. Head & Foot : Polymer ABS / PP. Coatings: Epoxy Powder Coating.

1 Function (Head Up) Motorized Bed

Bed Size: L: 2100 mm x W: 1080 mm x H: 450 to 750 mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: Aluminium / SS Head & Foot : Polymer ABS / PP. Coatings: Epoxy Powder Coating.

2 Functions (Head & Foot) Motorized Bed

Bed Size: L: 2100 mm x W: 1080 mm x H: 450 to 750 mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: Aluminium / SS Head & Foot : Polymer ABS / PP. Coatings: Epoxy Powder Coating.

3 Functions Motorized Bed

Bed Size: L: 2100 mm x W: 1080 mm x H: 450 to 750 mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: Polymer ABS / PP. Head & Foot : Polymer ABS / PP. Coatings: Epoxy Powder Coating.

5 Functions Motorized Bed Optional CPR

5 Functions Motorized Bed Optional: CPR (Manual/Electric), Central Locking, Nurse Panel, Battery Back up Bed Size: L: 2100 mm x W: 1080 mm x H: 450 to 750 mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: Polymer ABS / PP. Head & Foot : Polymer ABS / PP. Coatings: Epoxy Powder Coating.

5 Functions Manual Crank Bed

Bed Size: L: 2100 mm x W: 1080 mm x H: 450 to 750 mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: Aluminium Head & Foot : Polymer ABS / PP. Coatings: Epoxy Powder Coating.

5 function Motorised bed with CPR

Optional: CPR (Manual/Electric), Central Locking, Nurse Panel, Battery Back up Bed Size: L: 2100 mm x W: 1080 mm x H: 450 to 750 mm Material: Genuine CRC Heavy Duty Rectangular Pipes Side Railings: Polymer ABS / PP. Head & Foot : Polymer ABS / PP. Coatings: Epoxy Powder Coating.

BPL Accesories Software

Seamless Integration for CNS Software STS Software Holter Software Smart ECG Viewer Software

BPL Respiratory Accessories

Code Oxygen Concentrator Respiratory Accessories 94MAC001 OG4203 Humidifier Jar 09L94003 OG4203 Inlet Filter (New) 94MAC014 OG4203 Tube Set 13L94013 OG4203 Nasal Cannula (5 Meter) 09L8E002 OG4305 Humidifier Jar (Dual Input Model) 13L8E002 OG4305 Air Intake Filter Code Anaesthesia Workstation Respiratory Accessories/th> 09L2E001 E-Flo 6/E-Flo 6D/E-Flo 7 O2 Pipeline Supply Inlet Assembly 09L2E002 E-Flo 6/E-Flo 6D/E-Flo 7 N2O Pipeline Supply Inlet Assembly 09L2E003 E-Flo 6/E-Flo 6D/E-Flo 7 Air Pipeline Supply Inlet Assembly 09L2E004 E-Flo 6/E-Flo 6D/E-Flo 7 O2 Pipeline Supply Assembly 09L2E005 E-Flo 6/E-Flo 6D/E-Flo 7 N2O Pipeline Supply Assembly 09L2E006 E-Flo 6/E-Flo 6D/E-Flo7 Air Pipeline Supply Assembly 09L2E007 E-Flo 6/E-Flo 6D/Flowmeter Assembly for 4 Tubes 09L2E008 E-Flo 6/E-Flo 6D/E-Flo 7 Auxiliary O2 Flowmeter Assembly 09L2E009 E-Flo 6/E-Flo 6D/E-Flo 7 Disposable Patient Breathing Circuit for Adult (Latex Free)"

BPL Accesories Patient Cables

Patient Monitor cables Product Code Compatible with 91MED041 BM 5519/OM 5509 Patient Cable 91MED080 Magna, Cleo Plus, Agenta Plus, Aegis Plus, Elixo & 5855 Monitor Patient Cable 9GMAC001 ClearSign & SmartSign Patient Cable (5 Leads) 12L5A001 Excello ECO, Ultima Prime & Clareo ECG Patient Cable (5 Leads) ECG cables Product Code Compatible with 12L09006 Cardiart 108T DIGI ECG Patient Cable 91MED007 Cardiart 108T ECG Patient Cable 91MED038 Cardiart 6108 ECG Patient Cable 91MED060 Cardiart 6108T ECG Patient Cable 91MED099 Cardiart 6108T ECG Compatible ECG Patient Cable 12L17007 Cardiart 6208 ECG Patient Cable 13L9A008 Cardiart 6208 View/View Plus, 9108, 8108 View/View Plus ECG Patient Cable 91MED030 Cardiart 8108 ECG Patient Cable STS cables Product Code Compatible with 13L20002 Dynatrac ECG Patient Cable Defibrillator cables Product Code Compatible with 91MED081 DF2509/R Patient Cable 8BMAC001 DF2617/R Patient Cable 13L1B002 Relife 700 Patient Cable (5 Leads) Cardiac Analyser Cables Product Code Compatible with 9DMAC002 TRACK 48 Holter Recorder Patient Cable (10 Leads) 9DMAC001 TRACK 48 Holter Recorder Patient Cable (5 Leads) 9DMAC003 TRACK 48 Holter Recorder Patient Cable (7 Leads)"

BPL Accesories Clamps

Code Clamp Electrodes & Rubber Bulbs 91MED001A Cardiart 108T, 108T DIGI & 6108T ECG Clip-on Electrodes (Set of 4) 91MED005A Cardiart 108T, 108T DIGI & 6108T ECG Chest Electrode with Bulb 91MED067 Cardiart 6108T ECG Clip-on Electrodes (Only Clamp) 91MED068 Cardiart 6108T ECG Chest Electrode with Bulb 91MED107 Cardiart 6208 View/View Plus ECG Clip-on Electrodes (Only Clamp, Set of 4) 91MED110 Cardiart 6208 View/View Plus ECG Clip-on Electrodes (Only Clamp, Set of 4) 91MED106 Cardiart 9108, 8108 View/View Plus,6208 View/View Plus ECG Chest Electrode with Bulb (Set of 6) 91MED032 Cardiart 8108 ECG Clip-on Electrode (Each) 91MED031 Cardiart 8108R ECG Chest Electrode 91MED004A Rubber Bulb (Blue Colour) for all ECG Machines 91MED004 Rubber Bulb (Black Colour) for all ECG Machines 91MED065 Paediatric Chest Electrode with Rubber Bulb"

BPL Accesories-Probes and extensions

Patient Monitor Probes Product Code Patient Monitor Sensors 9GMAC008 ClearSign SpO2 Probe (Paediatric) 9GMAC009 ClearSign SpO2 Probe (Adult) 9GMAC010 ClearSign SpO2 Probe (Neonatal) 1DMAC001 Clareo Adult SpO2 Probe 57MAC015 Cleo Dolphin Adult SpO2 Probe 91MED096 Cleo & Magna Adult SpO2 Probe 57MAC023 Cleo Dolphin Y-Probe (Compatible) 57MAC003 Cleo Dolphin Y-Probe with Ear Clip 57MAC015A Dolphin Adult SpO2 Probe (Compatible) 5AMAC003 Excello/Ultima Prime Nellcor SpO2 Probe (Ori) 5AMAC003 Excello ECO Neonatal SpO2 Probe (Soft Wrap) 2BMAC002 Magna & Excello ECO Plus Child SpO2 Probe 2BMAC001 Magna & Excello ECO Plus SpO2 Probe 2BMAC003 Magna & Excello ECO Plus Neonate SpO2 Probe 91MED087 Magna & Excello ECO Adult SpO2 Probe (Compatible) 91MED089 Magna & Excello ECO Neonatal SpO2 Probe (Compatible) 91MED090 Excello ECO Temperature Probe 65MAC065 Ultima Nellcor Paediatric SpO2 Probe 61MAC047 Aegis Nellcor Adult SpO2 Probe 1EMAC003 Ultima Prime Nellcor SpO2 Probe (Compatible) 12L9G002 Masimo Adult SpO2 Probe 12L9G003 Masimo Neonatal Y-Probe 12L9G004 Masimo Paediatric Reusable Probe 02BMAC11 Rectal Temperature Probe (All Monitors)"

BPL Accesories NiBP Cuffs

Code NIBP CUFF 91MED092 Paediatric NiBP Cuff with Air Hose 91MED091 Adult NiBP Cuff with Air Hose 91MED093 Neonate NiBP Cuff with Air Hose 2BMAC007 Extra Large NiBP Cuff 9GMAC002 NiBP Extension Cable

BPL BP Monitor B3 Plus

Features
120 memories
Low battery indication
Automatic power off
Measurement Accuracy:
Pressure: ±3mmHg (±0.4kPa)
Pulse: ±5%

BPL Aneroid Sphygmomanometer

Features

• Mercury-free accurate measurements
• Facilitates one-hand operation
• Comes with a large insufflation bulb
• Latex-free cuff
• Accurate to ± 3.75 mmHg

BPL Pulse Oimeter Smart Oxy Lite

Features
Dual colour OLED display for high resolution
Comes with large fonts and 6 display modes that align as per the viewer's comfort
Low battery indication
Auto switch-off
Alarm for low perfusion
Highly accurate even in low perfusion conditions ~ 0.2%

BPL Pulse Oximeter IOXY

Features: 
User-friendly with big font display and brightness control
Connects to a smartphone through Bluetooth and connects to Android 4.3 or higher
Perfusion Index Display
Monitored data displayed in four directions and six display modes

BPL Pulse Oimeter SmartOxy

Features: 
Has a Color OLED screen
Comes with a big font display and brightness control
Monitored data displayed in four directions and six display modes
PI graph represents continuous peripheral perfusion
Comes with a compact and easy to carry pouch

Vissco Active Band

Drive Electronic Patient lift

Mobilita Seat Lift Assist

Vissco comfort commode chair

Vissco Commode chair

Vissco Commode raiser

Vissco Toilet Safety Rail

Mobilita 6 in 1 walker

Mobilita Commode chair

Drive Adjustable Suction Grab Bar

Drive Shower Chair

Drive Suction Grab Bar

Karma Commode Chair Rainbow 11

Karma Commode Chair Ryder 200 MS

Karma Commode Chair Ryder 210 MS

Karma Commode Chair Ryder 220 MS

Karma Commode Chair Ryder 200 MS FC

Karma Commode Chair Ryder 210 MS FC

Karma Commode Chair Ryder 220 MS FC

Karma Commode Chair Rainbow 2

Karma Commode Chair Rainbow 5

Karma Commode Chair Rainbow 10

Vissco Aluminium Walker

Vissco Avanti Walking Stick

Vissco Dura Walker with Wheels

Vissco Dura Walker

Vissco Hemip Walker

Vissco Medipedic Walker

Vissco Pediatric Walker

Vissco Quadripod Walking Stick

Vissco Step Walker

Vissco Tripod Walking Stick

Vissco Walking Stick cum Chair

Vissco Walking Stick

Mobilita Waliking Stick

Mobilita Waling Stick Handle

Drive Trigger Release Walker

Drive adjustable folding walking stick

Karma Tripod Ryder 310 ST

Karma Quadripod Ryder 420 ST

Karma Single Leg Stick Ryder 121 PC

Karma Walker Ryder 50 MS

Karma Aluminum Walker WK 50

Karma Aluminum Walker WK 51

Karma Aluminum Walker WK 80

Karma Rollater RT 60

Karma Elbow Crutch Ryder 22 PC

Ankle Binder

Ankle Brace CH

Anklet (Pair)

Anklet Comfeel (Pair)

PF Night Splint Derotation

Tynor F Drop Splint

Walker Boot - Short

Abdominal Support '9

Abs Wrap (Neoprene)

Ash Brace (Hyper Ext Brace) L

Contoured LS Support L

Hernia Belt

Lacepull LS Belt

Lumbo Sacral Belt

Lumbo Support UNI

Rib Belt L

Taylor's Brace short long SPL

Cervical Collar Hard Adjustable L

Cervical Collar Hard with Chin L

Cervical Collar Soft M

Cervical Collar Soft with Support L

Cervical Orthosis (Philadelphia) Ethafoam

Contoured Cervical Pillow UNI

Comp Stocking Mid Thigh Classic (Pair) L

Finger Cort L

Frog Splint

Thumb Finger Splint UNI

Cast Cover (Arm) UNI

Cast Cover (Leg) UNI

Cast Shoe (Rocker Sole)

Clavicle Brace with Velcro CH

Clavicle Brace with Velcro

Pouch Arm Sling (Baggy) CH

Pouch Arm Sling (Baggy) XL

Pouch Arm Sling Urban L

Universal Shoulder Immobiliser CH UNI

Universal Shoulder Immobiliser SPL

Functional Knee Support

Knee Cap (Pair)

Knee Cap (with Rigid Hinge)

Knee Cap Comfeel (Pair) XL

Knee Cap Open Patella

Knee Cap with Patellar Ring (Single) XL

Knee Immobiliser

Knee Support Hinged (Neoprene)

Knee Wrap (Neoprene) UNI

Knee Wrap Hinged (Neoprene) XXL

Pattelar Support UNI

Thigh Support L

Back Rest UNI

Coccyx Cushion Seat UNI

EXERCISE BALL

Heating Pad Ortho UNI

Hot & Cold Pack UNI

Ortho Stockinete 10Mt 50mm

Restrainer UNI

Scrotal Support L

Shoulder Support (Neoprene) SPL

Tub. Elastic Ban

Weight Cuff 0.5 Kg

Vissco Excercise cycle

Arch Support (Pair) AD

Bunion Splint UNI

Heal Cushion Silicone (Pair) L

Insole Full Silicone (Pair) XL

Insole Omni Silicone (Pair) M

Medical Arch Orthosis (Pair) Child

Medical Arch Orthosis (Pair) Adult S

Metatarsal Pad Silicone (Pair) UNI

Toe Separator Silicone (Pair)

Cervical Traction Kit (Sitting) with Weight Bag UNI

Cervical Traction Kit (Sleeping) with Weight Bag UNI

Leg Traction Brace L

Pelvic Traction Kit with Weight Bag L

Elastic Whrist Splint

Elbow Support L

Forearm Splint UNI

Hand Resting Splint

Tennis Elbow Support S

Wrist Brace with Double Lock L

Wrist Brace with Thumb (Neoprene) UNI

Wrist Splint with Thumb

Wrist Wrap (Neoprene) UNI

Karma Air Bed Airwave 3

Karma Backrest Ryder 500 BR

Wheel Chair Table

Transfer Belt Small Medium large

Talking clock

Sitz Bath

Shampoo Basin Pump

Plastic Writing Ring 3

Pill Cutter

Pill Organiser 1

Multi Reacher

Magnifying Lense Stand Nail Cutter

Lateral Body support

Key Holder

Transfer Board

Toilet Safety Rail

Gel Wheelchair Seat

Food Bumper

Folding Bed Tray

Foam Toilet Seat

Easy Step

Easy Gripper

Coxyx Sheet Veronac

Black Adhesive Tape

Bed Side Rail and support

Bed Side Rail

Bed pull up strap

Bed Comfort Wedge

Adult bib set of 2

Squat Mate Toilet stool 1

Bent Spoon

Mobilita Bed side Rail

Mobilita Foldable Bed Top Table

Seni Underpads

Seni Active Diapers Pack of 30

Seni Activ Diapers Pant type

Seni Classic Diapers

Kidney Tray

Mackintosh Rubber sheet

Urine Pot

Bed Pan

Microtone Pediatric Stethoscope

Microtone stethoscope

Eagle Digital weighing scale

Eagle Manual Weighing Machine

Airfit N20 Cushion

Specifications

• Height:   10 cm
• Weight:    50 gm
• Breadth:    10 cm
• Length:    10 cm

Airfit F20 Cushion

Specifications

• Height:    20 cm
• Weight:   150 gm
• Breadth:    20 cm
• Length:    20 cm

Airfit N20 Frame SYS

Specifications

• Height:   20 cm
• Weight:    200 gm
• Breadth:    20 cm
• Length:    20 cm

Airfit F20 Frame SYS

Specifications

• Height:    20 cm
• Weight:    200 gm
• Breadth:    20 cm
• Length:    20 cm

Airfit F20 Headgear

Specifications

• Height:    10 cm
• Weight:    50 gm
• Breadth:    10 cm
• Length:    10 cm

Airfit N20 Headgear

Specifications

• Height:    20 cm
• Weight:    50 gm
• Breadth:    20 cm
• Length:    20 cm

Filter for S9 AirSense (pack of 3)

Specifications

• Height:    2 cm
• Weight:    5 gm
• Breadth:    5 cm
• Length:    10 cm

AirMini Filter (Pack of 3)

Specifications

• Height:    2 cm
• Weight:    5 gm
• Breadth:    2 cm
• Length:    5 cm

SlimLine Tube

Specifications

• Height:    150 mm
• Weight:    100 gm
• Breadth:    150 mm
• Length:    200 mm

ClimateLine Tube

Specifications

• Height:   20 cm
• Weight:    200 gm
• Breadth:    20 cm
• Length:    20 cm
• Inner diameter:    0.6” (15 mm)
• Length of Tube:    6’6” (2.0 m)
• Material:    Flexible plastic and electrical components.

Humid X Plus - Pack of 6

Specifications

• Height:   5 cm
• Weight:    50 gm
• Breadth:    10 cm
• Length:    10 cm

HumidAir Standard Tub

Specifications

• Height:    5 cm
• Weight:    100 gm
• Breadth:    10 cm
• Length:    10 cm

Humid X Plus - Pack of 3

Specifications

• Height:   5 cm
• Weight:    100 gm
• Breadth:    10 cm
• Length: 10 cm

Resmed Airstart 10 APAP

Specifications

• Height:    116 mm
• Weight:     1106 gm
• Breadth:     205 mm
• Length:     150 mm
• Sound pressure level:     26.6 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2009 (CPAP mode)
• Modes:     CPAP, APAP, Ramp
• Sound power level:     26.6 dBA with uncertainty of 2 dBA
• Peak power consumption:     104W (108VA)
• Operating pressure range:     4–20 cm H2O
• Supplemental oxygen Maximum flow    Recommended maximum flow: 4 L/min
• Power supply unit:     90W power supply unit
• Storage and transport humidity:     5 to 95% relative humidity, non-condensing
• Storage and transport temperature:     -20°C to +60°C
• Operating humidity:     10 to 95% relative humidity, non-condensing
• Housing construction:     Flame retardant engineering thermoplastic
• Air outlet:     22 mm air outlet complies with ISO 5356-1:2004
• Typical power consumption:     53W (57VA)

Sensors    

• Pressure sensor: Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
• Operating altitude    Sea level to 2,591 m; air pressure range 1013 hPa to 738 hPa
• Operating temperature    +5°C to +35°C
• Maximum single fault steady-state pressure  
• The Device will shut down in the presence of a single fault if the steady-state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec.

Resmed AirCurve™ 10 V Auto

Specifications

• Height    116 mm
• Weight    1248 gm
• Breadth    150 mm
• Length    255 mm
• Sound pressure level    
• Supplemental oxygen Maximum flow    15 L/min (CPAP, S); 4 L/min (VAuto)
• Storage and transport humidity    5 to 95%relative humidity, non-condensing
• Ramp Time    You can set your Ramp Time to Off or between 5 to 45 minutes.
• Water capacity:    To maximum fill line 380 mL
• Air outlet    22 mm
• Typical power consumption    53W (57VA)
• Sensors    Pressure sensor: Internally located at device outlet, analoguegauge pressure type, -5 to +45cmH2O (-5 to +45 hPa); Flow sensor:Internally located at device inlet, digital mass flow type, -70 to +180 L/min
• Operating altitude    Sea level to 2,591m; air pressure range 1013hPa to 738 hPa
• Maximum single fault steady state pressure    Device will shut down in the presence of a single fault if the steady state pressure exceeds:30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
• Modes    S, VAuto, CPAP
• Sound power level    Pressure level measured according to EN ISO 17510-1:2009 (CPAP mode):SlimLine:26.6 dBA with uncertainty of 2 dBAStandard:26.6 dBA with uncertainty of 2 dBAPower level measured according to EN ISO 17510-1:2009 (CPAP mode):SlimLine:34.6 dBA with uncertainty of 2 dBAStandard:34.6 dBA with uncertainty of 2 dBADeclared dual-number noise emission values in accordance with ISO4871:1996.
• Peak power consumption    104W (108VA)
• Operating pressure range    S, VAuto: 2 to 25cm H2O (2 to 25 hPa); CPAP: 4 to 20cmH2O (4 to 20 hPa)
• Power supply unit    90W power supply unit; AC input range:100–240V, 50–60Hz 1.0–1.5A, Class II115V, 400Hz 1.5A, Class II (nominal for aircraft use); DC output:24V 3.75A
• Storage and transport temperature    -20°C to +60°C
• Operating humidity    10 to 95% relative humidity, non-condensin
• Housing construction    Flame retardant engineering thermoplastic
• Operating temperature    +5°C to +35°C Note: The air flow for breathing produced by this therapy device can be higher than the temperature of the room. Under extreme ambient temperature conditions (40°C) the device remains safe.
• Wireless Module    Technology used:4G, 2G. It is recommended that the device is a minimum distance of 2 cm from the body during operation. Not applicable to masks, tubes or accessories. Technology may not be available in all regions
•  

Resmed AirSense 10 Autoset Tripack 3G CPAP Device

Specifications

• Height    116 mm
• Weight    1248 gm
• Breadth    255 mm
• Length    150 mm
• Pressure measurement tolerance    ±[0.5 cm H20 (0.5 hPa) + 4% of measured value]
• Flow measurement tolerance    ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
• Peak power consumption    104W (108VA)
• Operating pressure range    4 to 20 cm H2O
• Supplemental oxygen Maximum flow    4 L/min
• Power supply unit    90W power supply unit
• Storage and transport humidity    5 to 95% relative humidity, non-condensing
• Storage and transport temperature    -4°F to +140°F (-20°C to +60°C)
• Operating humidity    10 to 95% relative humidity, non-condensing
• Housing construction    Flame retardant engineering thermoplastic
• Water capacity:    To maximum fill line 380 mL
• Air outlet    22 mm (complies with ISO 5356-1:2004)
• Typical power consumption    53W (57VA)
• Sensors    Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
• Operating altitude    Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
• Operating temperature    +41°F to +95°F (+5°C to +35°C)
• Maximum single fault steady state pressure    Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
• Modes    CPAP

Resmed AirMini portable CPAP Device

Specifications

• Height    52 mm
• Weight    300 gm
• Breadth    84 mm
• Length    136 mm
• Housing construction    Flame retardant engineering thermoplastic
• Air outlet    Proprietary connector, 16mm inner diameter. Not compatible with EN ISO 5356-1 connectors
• Standby power consumption    1 W
• Power supply unit    AC input range: 100–240V, 50–60Hz, 0.5-0.3A 115V, 400Hz for aircraft use, 0.4A
• Typical power consumption    6.3W
• Peak power consumption    27W
• Operating temperature    +41°F to +95°F (+5°C to +35°C)
• Operating humidity    10 to 95% relative humidity, noncondensing
• Storage and transport temperature    -13°F to +158°F (-25°C to +70°C)
• Storage and transport humidity    5 to 95% relative humidity, noncondensing
• Operating altitude    Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
• Modes    CPAP, APAP, For Her

Resmed Floton Auto CPAP

Specifications

• Height    93 mm
• Weight    1.2 kg
• Breadth    117 mm
• Length    170 mm
• Sound power level    <29 dB (A)
• Operating pressure range    4–20 cm H2O
• Power supply unit    100-240 VAC, 50-60 Hz, 24V, 2.5A Max
• Operating humidity    10 to 93% relative humidity, non-condensing
• Operating temperature    +5°C to +35°C
• Ramp Time    0-60 Min adjustable 1Min /Step
   

Resmed AirFit F30 Full Face Mask

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

Resmed Mirage Quattro Full Face Mask

Specifications

• Height    186 mm
• Weight    200 gm
• Breadth    109 mm
• Length    108 mm

Resmed Full face mask AirFit F20

Specifications

• Height    154 mm
• Weight    200 gm
• Breadth    159 mm
• Length    147 mm

Resmed Full Face mask AcuCare F1 - 4

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

Resmed Full Face mask AcuCare F1 - 0

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

Resmed Full Face mask AcuCare F1 - 1

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

Resmed AirFit P10 Nasal Pillow Mask

Specifications

• Height    590 mm
• Weight    200 gm
• Breadth    149 mm
• Length    30 mm

Resmed P10 AirMini Mask Pack

Specifications

• Height    37 mm
• Weight    50 gm
• Breadth    149 mm
• Length    175 mm
   

Resmed AirFit P30i Nasal Pillow Mask (S)

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

Resmed Nasal mask AirFit N20

Specifications

• Height    339 mm
• Weight    200 gm
• Breadth    291 mm
• Length    162 mm

Resmed AirFit N30i Nasal Cradle Mask (STD)

Specifications

• Height    20 cm
• Weight    200 gm
• Breadth    20 cm
• Length    20 cm

ResMed Mirage Micro Nasal Mask (M)

Specifications

• Height    155 mm
• Weight    200 gm
• Breadth    91 mm
• Length    98 mm

Resmed Nasal mask AirFit N20 (L)

Specifications

• Height    339 mm
• Weight    200 gm
• Breadth    291 mm
• Length    162 mm

N20 AirMini Set Up pack

Specifications

• Height    6 cm
• Weight    250 gm
• Breadth    15 cm
• Length    25 cm

Handyneb Nebuliser

Handyneb Vaporiser

Drive Portable OC iGO2

Philips Simply Go Portable OC

SimplyGo Mini Portable OC

Drive Devilbiss Oxygen Concentrator

Philips Ever Flo OC

BPL Oxy 5 Neo Dual

BPL Oxy 5 Neo

Yuwell Double Bottle Suction Machine

Yuwell Suction Machine

Mobilita Commode cum shower chair

Drive Aluminium Premum Wheelchair

Drive Sentra Wheelchair 300KG

Arcatron Commode chair

Arcatron Multipurpose Wheelchair

Arcatron Premium Multipurpose Wheelchair

Freedom 5000 Wheelchair

Freedom 60000 Reclining Wheelchair

Karma KM 2500L

Karma KM 2500

Karma SM 100.3 F22

Karma SM 150.3 F16

Karma SM 150.5 F22

Karma SM 150.5 F16

Karma Aurora 5

Karma Aurora 6

Karma TV 30

Karma Aurora 4

Karma CP 200

Karma ECON 800 Q24

Karma Econ 800 F16

Karma KM 5000 F24

Karma KM 5000 F16

Karma KM 8250

Karma KM 8020X

Karma VIP 515

Karma MVP 502

Karma Ergo Lite

Karma Ergo Lite 2

Karma Sergo 125

Karma Sergo 305

Karma Pediatric Wheelchair

Karma Sunny 6

Karma Sunny 7

Karma Sunny 8

Karma Commode Wheelchair Rainbow 6

Karma Commode Wheelchair Rainbow 7

Karma Commode Wheelchair Rainbow 8

Karma Fighter C Mag

Karma Fighter 2C

Karma Fighter C

Karma Fighter P

Karma Champion FB

Karma Champion Series

Karma Champion with Attendant Break

Karma Fighter C F12

Karma Fighter C HS

Vissco Zipline Power Wheelchair

Karma SP 100 Power Wheelchair

Karma KP 10.3S Power Wheelchair

Karma KP 10.3S CPT Power Wheelchair

Karma KP 25.2 Power Wheelchair

Karma 31T Blazer Power Wheelchair

Karma KP 80 Power Wheelchair

Karma Morgan W KISS Power Wheelchair

Karma eFlexx Power Wheelchair

Karma eFlex F20 Power Wheelchair

Resmed AirSense 10 Elite Tripack - 3G

Specifications

• Height    116 mm
• Weight    1248 gm
• Breadth    255 mm
• Length    150 mm
• Pressure measurement tolerance    ±[0.5 cm H20 (0.5 hPa) + 4% of measured value]
• Flow measurement tolerance    ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
• Peak power consumption    104W (108VA)
• Operating pressure range    4 to 20 cm H2O
• Supplemental oxygen Maximum flow    4 L/min
• Power supply unit    90W power supply unit
• Storage and transport humidity    5 to 95% relative humidity, non-condensing
• Storage and transport temperature    -4°F to +140°F (-20°C to +60°C)
• Operating humidity    10 to 95% relative humidity, non-condensing
• Housing construction    Flame retardant engineering thermoplastic
• Water capacity:    To maximum fill line 380 mL
• Air outlet    22 mm (complies with ISO 5356-1:2004)
• Typical power consumption    53W (57VA)
• Sensors    Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
• Operating altitude    Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
• Operating temperature    +41°F to +95°F (+5°C to +35°C)
• Maximum single fault steady state pressure    Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
• Modes    CPAP

BPL Accesories Software

Features
Seamless Integration for

CNS Software
STS Software
Holter Software
Smart ECG Viewer Software

BPL Respiratory Accessories

Features
Code         Oxygen Concentrator Respiratory Accessories
94MAC001         OG4203 Humidifier Jar
09L94003         OG4203 Inlet Filter (New)
94MAC014         OG4203 Tube Set
13L94013         OG4203 Nasal Cannula (5 Meter)
09L8E002         OG4305 Humidifier Jar (Dual Input Model)
13L8E002         OG4305 Air Intake Filter

Code         Anaesthesia Workstation Respiratory Accessories
09L2E001         E-Flo 6/E-Flo 6D/E-Flo 7 O2 Pipeline Supply Inlet Assembly
09L2E002         E-Flo 6/E-Flo 6D/E-Flo 7 N2O Pipeline Supply Inlet Assembly
09L2E003         E-Flo 6/E-Flo 6D/E-Flo 7 Air Pipeline Supply Inlet Assembly
09L2E004         E-Flo 6/E-Flo 6D/E-Flo 7 O2 Pipeline Supply Assembly
09L2E005         E-Flo 6/E-Flo 6D/E-Flo 7 N2O Pipeline Supply Assembly
09L2E006         E-Flo 6/E-Flo 6D/E-Flo7 Air Pipeline Supply Assembly
09L2E007         E-Flo 6/E-Flo 6D/Flowmeter Assembly for 4 Tubes
09L2E008         E-Flo 6/E-Flo 6D/E-Flo 7 Auxiliary O2 Flowmeter Assembly
09L2E009         E-Flo 6/E-Flo 6D/E-Flo 7 Disposable Patient Breathing Circuit for Adult (Latex Free)

BPL Accesories Patient Cables

Features
Patient Monitor cables

Product Code          Compatible with
91MED041         BM 5519/OM 5509 Patient Cable
91MED080         Magna, Cleo Plus, Agenta Plus, Aegis Plus, Elixo & 5855
Monitor Patient Cable
9GMAC001         ClearSign & SmartSign Patient Cable (5 Leads)
12L5A001         Excello ECO, Ultima Prime & Clareo ECG Patient Cable (5 Leads)
 

ECG cables

Product Code          Compatible with
12L09006         Cardiart 108T DIGI ECG Patient Cable
91MED007         Cardiart 108T ECG Patient Cable
91MED038         Cardiart 6108 ECG Patient Cable
91MED060         Cardiart 6108T ECG Patient Cable
91MED099         Cardiart 6108T ECG Compatible ECG Patient Cable
12L17007         Cardiart 6208 ECG Patient Cable
13L9A008         Cardiart 6208 View/View Plus, 9108, 8108 View/View Plus ECG Patient Cable
91MED030         Cardiart 8108 ECG Patient Cable
 

STS cables

Product Code     Compatible with
13L20002    Dynatrac ECG Patient Cable
 
Defibrillator cables

Product Code     Compatible with
91MED081    DF2509/R Patient Cable
8BMAC001    DF2617/R Patient Cable
13L1B002    Relife 700 Patient Cable (5 Leads)
 
Cardiac Analyser Cables

Product Code     Compatible with
9DMAC002    TRACK 48 Holter Recorder
Patient Cable (10 Leads)
9DMAC001    TRACK 48 Holter Recorder
Patient Cable (5 Leads)
9DMAC003    TRACK 48 Holter Recorder
Patient Cable (7 Leads)

BPL Accesories Clamps

Features
Code    Clamp Electrodes & Rubber Bulbs
91MED001A              Cardiart 108T, 108T DIGI & 6108T ECG Clip-on Electrodes (Set of 4)
91MED005A    Cardiart 108T, 108T DIGI & 6108T ECG Chest Electrode with Bulb
91MED067    Cardiart 6108T ECG Clip-on Electrodes (Only Clamp)
91MED068    Cardiart 6108T ECG Chest Electrode with Bulb
91MED107    Cardiart 6208 View/View Plus ECG Clip-on Electrodes
(Only Clamp, Set of 4)
91MED110    Cardiart 6208 View/View Plus ECG Clip-on Electrodes
(Only Clamp, Set of 4)
91MED106    Cardiart 9108, 8108 View/View Plus ,6208 View/View Plus ECG Chest
Electrode with Bulb (Set of 6)
91MED032    Cardiart 8108 ECG Clip-on Electrode (Each)
91MED031    Cardiart 8108R ECG Chest Electrode
91MED004A    Rubber Bulb (Blue Colour) for all ECG Machines
91MED004    Rubber Bulb (Black Colour) for all ECG Machines
91MED065    Paedatric Chest Electrode with Rubber Bulb

BPL Accesories Probes and extensions

Features
Patient Monitor Probes
Product Code         Patient Monitor Sensors
9GMAC008         ClearSign SpO2 Probe (Paediatric)
9GMAC009         ClearSign SpO2 Probe (Adult)
9GMAC010         ClearSign SpO2 Probe (Neonatal)
1DMAC001         Clareo Adult SpO2 Probe
57MAC015         Cleo Dolphin Adult SpO2 Probe
91MED096         Cleo & Magna Adult SpO2 Probe
57MAC023         Cleo Dolphin Y-Probe (Compatible)
57MAC003         Cleo Dolphin Y-Probe with Ear Clip
57MAC015A         Dolphin Adult SpO2 Probe (Compatible)
5AMAC003         Excello/Ultima Prime Nellcor SpO2 Probe (Ori)
5AMAC003         Excello ECO Neonatal SpO2 Probe (Soft Wrap)
2BMAC002         Magna & Excello ECO Plus Child SpO2 Probe
2BMAC001         Magna & Excello ECO Plus SpO2 Probe
2BMAC003         Magna & Excello ECO Plus Neonate SpO2 Probe
91MED087         Magna & Excello ECO Adult SpO2 Probe (Compatible)
91MED089         Magna & Excello ECO Neonatal SpO2 Probe (Compatible)
91MED090         Excello ECO Temperature Probe
65MAC065         Ultima Nellcor Paediatric SpO2 Probe
61MAC047         Aegis Nellcor Adult SpO2 Probe
1EMAC003         Ultima Prime Nellcor SpO2 Probe (Compatible)
12L9G002         Masimo Adult SpO2 Probe
12L9G003         Masimo Neonatal Y-Probe
12L9G004         Masimo Paediatric Reusable Probe
02BMAC11         Rectal Temperature Probe (All Monitors)

BPL Accesories NiBP Cuffs

Features
Code    NIBP CUFF
91MED092        
Paediatric NiBP Cuff with Air Hose

91MED091    
Adult NiBP Cuff with Air Hose

91MED093    
Neonate NiBP Cuff with Air Hose

2BMAC007    
Extra Large NiBP Cuff

9GMAC002    
NiBP Extension Cable

BPL Air Purifier AP - 04

Features
6-stage purification
HEPA filters with UV function-reduces 99.97% particulate matter
High Clean Air Delivery Rate (CADR)-190 m3/hr
Wide coverage area up to 500 Sq Feet
Touch screen to change modes
Air quality sensor - Blue/Yellow/Red colour indication representing Air Quality
4 fan speeds
High-Resolution TFT Touch Screen with dynamic state display
3 Modes: Auto/Manual/Sleep
Air Quality Sensors: Temperature & Humidity display

BPL Air Purifier AP - 03

 Features
4-stage purification
HEPA filters with UV function-reduces 99.97% particulate matter
Higher Clean Air Delivery Rate (CADR)-190 m3/hr
Air quality indicator
360-degree airflow
Digital Control Panel with Blue light
3 Modes: Auto/Manual/Sleep
5 Timers Functions: Continuous/1/2/4/8 Hour
Air Quality Sensors:Blue/Yellow/Red colour indication representing Air Quality

BPL Air Purifier AP - 02

Features
Handheld Smart Design with Power ON LED indication
Cycle Working Program,10 mins ON,20 mins OFF and repeated – automatically shuts down after 8 hours
Negative Ion Output: 3 million Pcs/cm3
Coverage area: <5 m2

BPL Air Purifier AP-01

Features
Handheld Smart Design with LED indication
Sound Sensor control LED light option which can be used as a Night Lamp
Negative ion output : 3 million Pcs/cm3
Low noise and low power consumption
Coverage area: <5 m2

BPL Eflo 6

Features
 8.4″ Colour TFT screen with display of Pressure-time, Flow-time & Volume-time waveforms
Standard Ventilation Modes of VCV, PCV, Manual & Standby
 Advanced proportional solenoid valve technology to realize accurate ventilation control
 Fully integrated Absorber system with Heater Function and CO2 Bypass
  Compact and lightweight body design for easy and safe manoeuvrability
 Yoke system (1xO2, 1xN2O; without Cylinders)
 Mechanical flowmeter with backlight on/off function (4 tubes)
Dual flow sensing- Inspiratory and expiratory volume measured and displayed on the screen
Lithium battery – Up to 360 minutes back up
Electronic PEEP allows clinicians to set accurate PEEP.
 Optional: Vaporiser, SpO2 Module, CO2 (Mainstream), Active AGSS System, Communication Interface, Autoclavable function of Absorber, Auxiliary Oxygen flow meter, Mainstream Gas Module for 5 kinds of Anaesthetic Agent.

BPL EFLO 6C

Features
  8.4″ colour TFT screen with display of Pressure-time, Flow-time and Volume-time waveforms
Standard Ventilation Modes of VCV, PCV, Manual & Standby
Advanced proportional solenoid valve technology to realize accurate ventilation control
 Low flow capable mechanical flow meter with hypoxic guard system and back light on/off function with five tubes (two tubes for O2 and N2O and one tube for Air)
 Integrated Absorber- Can be easily assembled or disassembled without any tools. All gas connections are internal which reduces chances of leakage
 Dual flow sensing - Inspiratory and expiratory volume measured and displayed on the screen
 Lithium battery - Up to 360 minutes back up
  Comprehensive alarm system
 Central pipeline and cylinders. Yoke system (1XO2, 1XN2O without cylinders)
  Standard Fresh Gas Outlet for connecting Semi Open circuit
  Adult and Paediatric modes of operation
 Electronic PEEP allows clinicians to set accurate PEEP.

BPL Eflo 6D

Features
 8.4″ colour TFT screen with display of Pressure-time, Flow-time and Volume-time waveforms.
 VCV, PCV, SIMV (V) + PS,SIMV (P) + PS, PSV with apnea back up, Manual . Optional PRVC
Advanced proportional solenoid valve technology to realize accurate ventilation control
 Fully integrated Absorber system with Heater Function and CO2 Bypass
 Comprehensive alarm system
  Adult, Paediatric and Neonatal modes of operation compact and light weight body design for easy and safe manoeuvrability
Yoke system (1xO2, 1xN2O; without Cylinders)
  Mechanical flowmeter with back light on/off function (5 tubes)
 ACGO function and Electronic PEEP
 FiO2 monitoring
 Lithium battery – Up to 360 minutes back up
 Dual Flow Sensing - Inspiratory and expiratory volume measured and displayed on the screen
 Optional: Vaporiser, SpO2 Module, CO2( MASIMO – Mainstream), Active AGSS System, Communication Interface, Autoclavable function of Absorber, Auxiliary Oxygen flow meter, Mainstream Gas Module for 5 kinds of Anaesthetic Agent, CO2 and N2O (MASIMO)

BPL EFLOW 7

Features
10.1″ Colour TFT Screen with display of Pressure-time, Flow-time & Volume-time waveforms and P-V,F-V,F-P Loops
 VCV, PCV, SIMV (V) + PS,SIMV (P) + PS, PSV with apnea back up, Manual . Optional PRVC
Advanced proportional solenoid valve technology to realize accurate ventilation control
Electronic flowmeters for O2, N20, Air with High accuracy and easy reading
Comprehensive alarm system
 Compact and light weight body design for easy and safe manoeuvrability
 Yoke system (1xO2, 1xN2O; without Cylinders)
 Lithium battery: 300 Minutes of monitoring
 Fully integrated Absorber system with Heater Function and CO2 Bypass
Optional: Touch Screen, Vaporiser, SpO2Module, Mainstream CO2, Active AGSS System, Communication Interface, Autoclavable function of Absorber, Auxiliary Oxygen flow meter, Mainstream Gas Module for 5 kinds of Anaesthetic Agent, AIR/O2 Driving for Ventilator with Auto Switching, Gas and Agent consumption calculation software Package

BPL Penlon Prima 320

Features
8.4” TFT colour touchscreen
Up to six ventilation modes
Optional CO2 and SpO2 monitoring
Integrated CO2 absorber and bellows unit with ventilator interface
Selected compatible back bar
Switchable front-facing common gas outlet
10.4” Version also available 

BPL Penlon 440-445

Features
Ultra compact design 
Lightweight frame, 500 mm wide, with integrated carry handle
O?, N?O and Air flowmeter with integrated AHD
Auxiliary O? and Air outputs
Central gas supply or cylinder
Table-top or rail mounted option
Optimum performance, and enhanced patient safety
Proven mechanical anti-hypoxic system
Ultra compact footprint,only 500 mm wide
Fully compliant to ISO 80601-2-13 standard
Designed and manufactured in the UK
Sigma Delta vaporizer offers multi-choice fill system options

BPL Penlon Prima 451 MRI compatible

Features
Approved for use with a 1.5/3.0 tesla scanner, up to the 1000 gauss line
Designed specifically for use in an MRI environment
Electronic Touch screen ventilator with 6 Ventilation
Compact footprint, optimum manoeuvrability
Total system compatibility
Designed and manufactured in the UK
Independently tested
Enclosed construction – no hidden storage areas promotes MRI-safe operation 
Fully compliant to ISO 80601-2-13 standard, and to the Restrictions of Hazardous Substances (RoHS) Directive 
MRI Compatible Vaporisers , Laryngoscope , Suction Controller & AGSS also available
Request For Demo
 

BPL Prima 465

Features
Electronic flow display and conventional flowmeter options are available
Six ventilation modes
New top shelf with secure GCX™ mounting system for patient monitors
Territory-specific electrical outlet options
Selectatec® compatible backbar (two or three stations) with interlock on three station option 
Illuminated work space with pull-out writing surface
GCX™ compatible aluminium uprights for additional accessory mounting
Large capacity drawer units
Integrated CO2 absorber and bellows unit with ventilator interface

BPL Penlon Prima 450

Features
Electronic flow display and conventional flowmeter options
Six ventilation modes
New top shelf with secure GCX™ mounting system for patient monitors
Territory-specific electrical outlet options
Fully integrated ventilator and absorber
Selectatec® compatible backbar (one or two stations)
Illuminated work space
Large capacity drawer units
GCX™ compatible aluminium uprights for additional accessory mounting
Integrated CO2 absorber and bellows unit with ventilator interface
Designed and manufactured in the UK
HIS connectivity
Intuitive design in a compact footprint
Low life costs

BPL Penlon Prima 465

Features
Electronic gas mixer with electronic anti-hypoxic device and digital flowmeters
12.1” TFT colour touchscreen
Eight ventilation modes
 Suitable for adult, paediatric and neonates
 Optional anaesthetic gas monitoring
Integrated CO. absorber and bellows unit with ventilator interface
 Selectatec® compatible backbar (two station)

BPL Infa-Warmer

Features
Far infra-red heater operating in two modes-manual and servo. Canopy rotation-240° horizontally and ±30° tilt.
A removable baby guard that can easily be wiped clean.
Pressure dispersion mattress with uniform heating.
Rotary dampers aid silent opening of baby guards.
Alarms for baby check, power failure, system failure, skin temperature probe and canopy tilt.
Touch control panel LCD for ease of use.

BPL SunFlower-warmer

Features
Ceramic heater with pre-heating.
Rotary dampers and dual wheel castors reducing noise levels to <48db.
Warmer head tilt (85° both sides).
Pressure dispersion mattress with uniform heating.
Available as a stand and wall-mount option.
Height adjustment of bassinet.
Alarms for baby check, power failure, system failure, skin temperature probe.

BPL C-Ray Pro C ARM

BPL C RAY Prime C ARM

BPL HF C-Arm - CRAY PRIME 580

BPL Color Doppler Ecube 8 Diamond

Features
21.5’’ wide Full HD LED monitor (IPS).
10.4’’ LED touch screen with user friendly UI and Customizable presets.
Storage: Combination of SSD 120GB for faster processing  and HDD 1TB for saving large amount of patient data.
3 Step Gel warmer for better patient comfort.
Crystal Signature™ and Power View™ Transducer for better penetration and resolution.
Articulating monitor arm and Control panel up/down for height adjustment.
Volume Master™- ALPINION’s intuitive 3D/4D software package in Convex and endocavity transducers offers fast rendering speed and outstanding rendering quality for diagnosis.
Advanced 3D/4D features like Anyslice, Mslice and Volume Analysis for better 3D/4D diagnosis.
Live HQ- Premium 3D/4D feature to render a realistic view of fetus.
Advanced Cardiac features like stress echo, Cube strain, Auto EF, TDI.
Other advanced features like Strain Elastography, Auto NT, Auto IMT, Needle vision Plus available.
High density linear and High density Endocavity volume transducer for better resolution.

BPL Color Doppler Ecube 8 LE

BPL Color Doppler Ecube 8 CV

BPL Color Doppler Ecube 5

Features
Wide 19.5" LED display
Optimal Imaging Suite
FleXcan ™ Architecture
Auto IMT easily and quickly determines the thickness of the near and far carotid walls with the touch of a single button
Xpeed ™- Optimizes images in B-mode, Color Flow and Doppler modes with one button operation
Application specific measurement package
DICOM 3.0 Connectivity
Eco friendly and compact design
Excellent image quality
Simplified platform
Compact and extremely noiseless
Innovative new platform design

BPL Color Doppler Ecube 7

Features
19″ Wide 19.5" LED monitor
Slim Design with Efficient Workflow
Powerful Image Performance
Lightweight and slim design provides the best fit for small spaces and excellent mobility
Unique single crystal technology
Integrated acoustic technology for high-resolution images
Ergonomic design technology for excellent grip and lightweight transducers
Innovative flexible software-driven imaging platform for system stability and easy upgrades with minimum hardware changes
DICOM 3.0 standard, MPPS and Modality worklist
Optimal storage formats (USB, CD/DVD and network storage connections)
Core imaging technology set (SCI, FTHI, FCI, SRI and FullSRI™)
Lucrative 3D/4D engine for routine OB/GYN exams
One-touch auto-optimization for 2D, Color and Doppler
Auto IMT
Auto trace PW, CW
Application-Specific Measurement Package
Optimized for Multiple Applications: General Imaging/ Musculoskeletal/ OB/GYN

BPL Color Doppler Ecube 9 Diamond

Features
Uniform and fundamentally excellent image quality across the whole product lifetime
Refined acoustic technology with great delicacy that manages and handles ultrasound signals perfectly
Unique and flexible imaging platform, FleXcan™ Architecture, enhances system stability
Delivers uniform image quality and crystal clear image performance to clinicians
Creates optimized images for each application by effectively decreasing artefacts and enhancing the borderline of each organ
Single crystal technology (Crystal Signature™), results in the high-resolution image, wide-bandwidth images, and deep penetration
19” Wide 19.5" LED Monitor – A high-quality and wide LED monitor required for medical reviews
Built-in Gel Warmer for added patient comfort
MicroFit technology™, unique design for optimal scan conditions
Lightweight transducer and flexible cable
Excellent performance in 2D /Color /Doppler mode
A wide selection of transducers that include various high-density convex transducers
Customized package for cardio-vascular exams

BPL Color Doppler Ecube 9

Features
Uniform and fundamentally excellent image quality across the whole product lifetime
Refined acoustic technology with great delicacy that manages and handles ultrasound signals perfectly
Unique and flexible imaging platform, FleXcan Architecture™, enhances system stability
Optimal Imaging Suite™ ensures optimized images for each application by effectively decreasing artifacts  and enhancing the borderline of each organ
Single crystal transducer technology (Crystal Signature™), results in high-resolution image, wide-bandwidth images, and deep penetration
19” Wide 19.5" LED Monitor – A high-quality and wide LED monitor required for medical reviews
MicroFit™ technology, Alpinion’s unique design for optimal scan conditions. Micro-pinless typed transducer connector to remove any signal interference
Lightweight transducer and flexible cable
Excellent performance in 2D/Color/Doppler mode
A wide selection of transducers that include various high-density convex transducers
Customized package for cardio-vascular exams
https://youtu.be/yHkxXjVSVFc

BPL Color Doppler Ecube 11

Features
E-CUBE 11 has been re-designed to simplify and streamline day-to-day workflow. Our intuitive, tablet-like touchscreen interface is designed to reduce reach and button pushes
10.4 inch capacitive touch screen, high-resolution display with Instant Response technology allowing for quick and precise key selections
Wide 21.5" full HD LED monitor with IPS (In-Plane Switching) technology
Frame rate enhancing technology - Experience both highly detailed ultrasound images and superior temporal resolution in high frame rate
Crystal Signature™
Wide range of transducers for multiple clinical applications
Adaptive post processing introduces a high-performance image filter which is adapted differently by each application
Offers qualitative and semi-quantitative elastography package which provide useful clinical information and help increase diagnostic confidence
Volume Master™ - ALPINION’s intuitive 3D/4D software package in convex and endocavity transducers offers fast rendering speed and outstanding rendering quality for diagnosis
Live HQ™ - The combination of qualified 3D/4D transducers with strong performance reliability and geometrical accuracy enables ALPINION’s Live HQ™ software to render a realistic fetal shape
Using the powerfully optimized and advanced signal algorithm, Optimal Imaging Suite™(FullSRI, SCI, FCI) provides exceptional detail, clearer border definition and a wider gray-scale in tissue
The advanced platform with HD Digital Beamforming powering E-CUBE 11, enables you to get outstanding image resolution “especially in near field,” consolidating uniformity
Integrated Solid-state drive (SSD)with 512GB image storage capacity & Industry-leading computational speed processor (Intel Core ™ i7) Microsoft® Windows® 7 Integration
MicroFit technology powered innovative transducer design facilitates optimized performance and enhances ergonomics
Wireless LAN for PACS data transfer without any space restriction
*Available for sale in India and Nepal only.
https://youtu.be/6NXLpPPU8Jw

BPL Color Doppler Ecube 12

Features
21.5’’ wide Full HD LED monitor (IPS).
10.4’’ LED touch screen with user friendly UI and Customizable presets.
Storage: Combination of SSD 120GB for faster processing and HDD 1TB for saving large amount of patient data.
3 Step Gel warmer for better patient comfort.
Crystal Signature™ and Power View™ Transducer for better penetration and resolution.
High density linear and High density Endocavity volume transducer for better resolution.
Single crystal high density Convex transducer (1-6MHZ) for better penetration and resolution.
Articulating monitor arm and Control panel up/down for height adjustment.
Single crystal high density volume transducer (1-6MHZ) for reconstructing high quality 3D/4D images.
Volume Master™- ALPINION’s intuitive 3D/4D software package in Convex and endocavity transducers offers fast rendering speed and outstanding rendering quality for diagnosis.
Advanced 3D/4D features like Anyslice, Mslice and Volume Analysis for better 3D/4D diagnosis.
Live HQ- Premium 3D/4D feature to render a realistic view of fetus.
Advanced Cardiac features like stress echo, Cube strain, Auto EF, TDI.
Other advanced features like Contrast Imaging, STIC imaging, Strain Elastography, Auto NT, Auto IMT, Needle vision Plus available.
Touch Clip feature helps you to compare two different images for better diagnosis.

BPL Colour Doppler 23 ECUBE15

Features
21.5″ Wide LED Monitor with Super Responsive Touch Screen
10.4" touch screen with user friendly UI and customizable presets
Greater sensitivity, Wider bandwidth, Higher resolution
Motorized-height adjustment of control panel
Enhanced visualization of structures, clear depth perception, and color sensitivity
Comprehensive cardiac measurement and analysis package
Unparalleled image quality in 2D mode, Color Flow, and Doppler modes
Crystal Signature™ transducers to help increase penetration and deliver a high definition resolution
Volume Master™ - ALPINION’s intuitive 3D/4D software package in convex and endocavity transducers offers fast rendering speed and outstanding rendering quality for diagnosis
Live HQ™ - The combination of qualified 3D/4D transducers with strong performance reliability and geometrical accuracy enables ALPINION’s Live HQ™ software to render a realistic fetal shape
Cube Strain™ & Stress Echo-advanced cardiac software package for accurate diagnosis
Needle Vision ™  & Needle Vision Plus: to enhance the visibility of needle tip and shaft, making the procedure easy 
Cube View ™  - World’s first Real time image sharing software to improve your patient throughput and give you a diagnostic edge
Advanced 3D/4D rendering engine (Volume Master™ and LIVE HQ™) offering excellent details of fetus
High performance, lightweight Crystal Signature™ volume convex transducer for volume acquisitions
Wide linear transducer to evaluate breast abnormalities
User-oriented system and transducer design fulfills the ultimate comfort for the users as well as patients.
https://youtu.be/8MtqYpOpr8U

BPL CPAP lifepap

Features
E-VAPS (Volume Assured Pressure Support): eVAPS, intelligently ensures the required pressure support for patients to deliver the intended fixed volume
Auto E-pap: Addresses any upper airway obstruction. Monitors your upper airway and auto adjust the expiratory pressure
Intelligent Pressure release (iPR): Makes the therapy comfortable by reducing the treatment pressure upon exhalation
Advanced Ventilation Algorithm: Works in synchronous with the patients own breathing pattern, thereby improving the patient's compliance with the therapy
Simple and intuitive user interface: Personalized patient comfort settings along with different modes lets patients undergo a seamless and a worry free therapy.
Multiple Therapy Modes : CPAP, S, AUTO S, S/T, T, & AUTO S/T Therapy Modes
Display: High Resolution 5"inch color touch screen display
Humidifier: Integrated humidifier along with pre-heating function
Power Efficient: Energy-saving mode and auto therapy ON/OFF functions
Intelligent Adjustments: Auto altitude and auto humidity adjustment
Pressure Range: 4 - 25CM H2O (For 25S/25A/25ST/25STA)
Data Recording & Transfer: 4GB SD Card with 1 year therapy details

BPL CPAP

Features
E-VAPS (Volume Assured Pressure Support): eVAPS, intelligently ensures the required pressure support for patients to deliver the intended fixed volume
Auto E-pap: Addresses any upper airway obstruction. Monitors your upper airway and auto adjust the expiratory pressure
Intelligent Pressure release (iPR): Makes the therapy comfortable by reducing the treatment pressure upon exhalation
Advanced Ventilation Algorithm: Works in synchronous with the patients own breathing pattern, thereby improving the patient's compliance with the therapy
Simple and intuitive user interface: Personalized patient comfort settings along with different modes lets patients undergo a seamless and a worry free therapy.
Multiple Therapy Modes : CPAP, S, AUTO S, S/T, T, & AUTO S/T Therapy Modes
Display: High Resolution 5"inch color touch screen display
Humidifier: Integrated humidifier along with pre-heating function
Power Efficient: Energy-saving mode and auto therapy ON/OFF functions
Intelligent Adjustments: Auto altitude and auto humidity adjustment
Pressure Range: 4 - 25CM H2O (For 25S/25A/25ST/25STA)
Data Recording & Transfer: 4GB SD Card with 1 year therapy details